SYNESTHESIA
ATTENTION!
- Unplug MIDI cables (if any) from Synesthesia prior to running the update.
- Use the latest version (2.4.1) of SymmLab editor to perform the update. UNINSTALL older version.
|
Firmware & Software
Package ( v2.3.4 - latest version) |
Download this if you want to update the firmware. The bundled editor software will be of the latest version which ensures compatibility with the firmware.
If you just need the editor software, go to the "Software Only" section to download the installer. If you just need the firmware, go to the "Firmware Only" section below. |
Windows
|
| ||||||
Update procedure :
1. Download firmware 2.3.4 Package and extract the content.
2. If you have older version of SymmLab editor installed, remove it, then install the new SymmLab version 2.4.1
3. Do Firmware Update :
- Hold down both footswitches on power up. Release when the display reads "FIRMWARE UPDATE".
- Connect the pedal to your computer via the supplied USB cable and start SymmLab.
- Click the 'Browse for Firmware File' button, load the file Firmware v2.3.2.fdt and start the update.
4. When the update is completed, continue with 'library update'
Menu >> Update Library.
- DONE -
1. Download firmware 2.3.4 Package and extract the content.
2. If you have older version of SymmLab editor installed, remove it, then install the new SymmLab version 2.4.1
3. Do Firmware Update :
- Hold down both footswitches on power up. Release when the display reads "FIRMWARE UPDATE".
- Connect the pedal to your computer via the supplied USB cable and start SymmLab.
- Click the 'Browse for Firmware File' button, load the file Firmware v2.3.2.fdt and start the update.
4. When the update is completed, continue with 'library update'
Menu >> Update Library.
- DONE -
|
Major additions in Firmware update v2.3.0
1. New algorithm : Wah Filter 2. New feature : Bypass on Midi PC call. Please take a minute to go over the release note, some important information inside! |
| ||
|
Software only
|
- Make sure you download the appropriate version.
|
versions |
Windows |
Mac |
|
2.4.1 (latest) - works with firmware v2.3.x
|
|
| ||||
|
2.2.0/2.2.1 - works with firmware v2.2.x
|
|
| ||||
OS Compatibility
- Windows : XP, 7, 8.x, 10
- Mac : 11 (Big Sur), 10.15 (Catalina), 10.14 (Mojave), 10.13 (High Sierra), 10.12 (Sierra), 10.11 (El Capistan), 10.10 (Yosemite), 10.9 (Maverick).
Firmware only
| Synesthesia Firmware v2.3.4.fdt |
USB Driver
| USB Driver Setup (Win).zip |
* This driver is for Windows only, Mac does not need a separate driver installation.
* USB driver need to be installed only once. This is the same driver used by SpecLab and CabsLab.
* USB driver need to be installed only once. This is the same driver used by SpecLab and CabsLab.
Documentation
Update release note
| Synesthesia v2.0.0 - Release Note.pdf |
v1.0.x |
v2.x.x |
|
| ||||
|
| ||||
|
| ||||
|
| ||||
|
| ||||