Frequently Asked Question on Cabzeus
Q : If only one input is used will I get a mono output or stereo output?
A : You will get stereo outputs, just make sure the input goes to the Left Input (mono).
Q : Can it do the opposite, that is, combining the stereo inputs into a mono output?
A : Yes Cabzeus can blend the two input signals producing a mono output which you can take from either the left or right output.
The blending occurs post-processing, thus (if desired) different speaker/cab/mic placement parameters can be applied to each signal independently prior to the blending..
Q : Can you bypass the speaker simulation?
A : Absolutely.
Q : Will I damage Cabzeus if I accidentally let the phantom power on my mixer turned on?
A : Cabzeus has been designed to tolerate accidental application of phanthom power, it will not be damaged.
Q : How do I change the presets?
A : You can use the preset selector knob (the middle knob), an external switchbox (momentary / normally opened), or a MIDI controller.
Q : Can I use 18V power supply with Cabzeus?
A : No, and you don't have to. Cabzeus employs a charge pump circuitry which boost the 9V supply voltage to 18V for internal operating voltages, the highest supply voltage allowable is 12V DC.
A : You will get stereo outputs, just make sure the input goes to the Left Input (mono).
Q : Can it do the opposite, that is, combining the stereo inputs into a mono output?
A : Yes Cabzeus can blend the two input signals producing a mono output which you can take from either the left or right output.
The blending occurs post-processing, thus (if desired) different speaker/cab/mic placement parameters can be applied to each signal independently prior to the blending..
Q : Can you bypass the speaker simulation?
A : Absolutely.
Q : Will I damage Cabzeus if I accidentally let the phantom power on my mixer turned on?
A : Cabzeus has been designed to tolerate accidental application of phanthom power, it will not be damaged.
Q : How do I change the presets?
A : You can use the preset selector knob (the middle knob), an external switchbox (momentary / normally opened), or a MIDI controller.
Q : Can I use 18V power supply with Cabzeus?
A : No, and you don't have to. Cabzeus employs a charge pump circuitry which boost the 9V supply voltage to 18V for internal operating voltages, the highest supply voltage allowable is 12V DC.
Q : Can you show me the typical routing / interconnection?
A : Here's a couple of typical applications. Stompboxes or other effects processors may be put in place of the amp, in which case the speaker cabinet / load box should be disconnected, or replaced with an amp.
A : Here's a couple of typical applications. Stompboxes or other effects processors may be put in place of the amp, in which case the speaker cabinet / load box should be disconnected, or replaced with an amp.
